Black 0020
Black0020
HOME MODE
◆ Use this mode when sleeping or when anyone
is staying inside.
◆ Home Mode causes an instant alarm when
any perimeter sensor is triggered.
◆ Home Mode causes a delayed alarm when any
exit/entry sensor is triggered (except in Home
Instant Mode when they are instant).
◆
Alarm siren stops automatically after five
minutes and the system will remain armed.
◆ Home Mode ignores all interior sensors
(motion detectors, etc.).
Arm to Home Mode by entering a user code,
and pressing [
HOME
].
The user can “Quick Arm” to Home Mode from
Off or Chime Mode by holding down the [HOME]
key for two seconds. (Quick arming can be
disabled; see the “Advanced Programming”
section of this manual.)
❇ When the system is armed to the Home Mode,
the Console will sound a “Gong” and two “Beeps”.
Enter a user code and press [
OFF
] or [
CHIME
] to
disarm from Home Mode and/or stop the alarm
siren.
❇ If an alarm has occurred, multiple beeps will
sound after disarming and the sensor light for
the sensor(s) that caused the alarm will flash
(switch to Off Mode again or re-arm the Console
to stop the flashing alarm memory light).
SECURE EXIT
If the system is already in the Home Mode and
the user wants to exit the premises while
leaving someone inside with the system still in
Home Mode, enter a user code and press the
[
HOME
] key.
❇ A “gong” and two “beeps” will sound and the
HOME light will blink for 60 seconds. No exit
delay beeps will sound during the Exit Delay.
◆ The user can leave through a door with a delayed
perimeter sensor during the 60 second Exit Delay
without causing the Console to begin an Entry
Delay.
◆ Re-entering during the silent Exit Delay will
extend the Exit Delay another 60 seconds
(one time only).
✍
NOTE: The Exit Delay time can be changed; see
the “Advanced Programming” section of this
manual.
HOME INSTANT MODE
If the system is already in the Home Mode and
the user wants to make all exit/entry sensors
instant, press the [
HOME
] key for 2 seconds.
❇
Two “gongs” and two “beeps” will sound and
the HOME light will blink continuously.
◆ Because all exit/entry sensors will now cause an
instant alarm when in Home Mode, the
Console must be disarmed before opening any
exit/entry delay door.
MANUAL BYPASSING OF SENSORS
◆ Manual bypassing of sensors in the Home
Mode allows arming of the system at night
with open windows, while still having
perimeter protection with other closed doors
and windows.
◆ The Console will resist arming with open door
or window sensors.
❇ Four high-low beeps to warn the user that
something is open and the system will remain
in the previous mode.
❇ Lit sensor status indicators show which
sensors are open.
To manually bypass the open sensors, arm
the system again within 5 seconds.
❇ A “gong” and two “beeps” will sound, the
HOME indicator will light, and the open
sensors will be bypassed.
✍
WARNING: Bypassed sensors cannot cause an
alarm.
START IN OFF
OR CHIME MODE
YOUR
USER
CODE
DONE
1 GONG
& 2 BEEPS
(OPTIONAL)
HOME MODE
HOME
START IN
HOME MODE
YOUR
USER
CODE
DONE
1 GONG
& 2 BEEPS
(OPTIONAL)
HOME
SECURE EXIT
START IN
HOME MODE
DONE
2 GONGS
& 2 BEEPS
HOLD
DOWN
HOME INSTANT
MODE
HOME
DONE
1 GONG
& 2 BEEPS
HOLD
DOWN
HOME
START IN OFF
OR CHIME MODE
QUICK ARM
18
