Black 0031
Black0031
AUTOMATION OUTPUT MODE DURING ALARM
✍
NOTE: For the Automation Output to activate
during an alarm, that function must be enabled
with Programming Step 71 or 72.
◆ If the Automation output is programmed to
activate during an alarm, it can be
programmed to flash or be steady.
AUTOMATION ACTIVATION TONE
◆ The factory setting causes the Console to
sound a “bing” when the Automation Output
is activated by pressing the [
(A)
] key, or when
it’s triggered with a two-button remote control.
◆ Alternately, this sound can be silenced.
REMOTE CONTROL ARM/DISARM CHIRP
◆ When arming with the portable remote
control, the factory setting causes the Console
to “chirp” once when armed, twice when
disarmed, and three times when arming with
sensors bypassed.
◆ Alternately, these chirps can be silenced.
✍
NOTE: If these chirps are silenced, it is
recommended to program the Automation Output
to be active when the system is armed, so a light
can be triggered displaying the arming status of
the Console.
AUTOMATION OUTPUT FLASHES DURING AND AFTER ALARM
◆
The factory setting causes the Console’s
Automation Output to activate when pressing
the [
(A)
] key, or when it’s triggered with a
two-button remote control.
◆ In addition, the Console can be programmed
to flash the Automation Output during and
after any alarms.
◆ The output will continue to flash until the
flashing status lights are cleared.
AUTOMATION OUTPUT ON DURING ALARM
◆ The factory setting causes the Console’s
Automation Output to activate when pressing
the [
(A)
] key, or when it’s triggered with a
two-button remote control.
◆ In addition, the Console can be programmed
to activate the Automation Output during
alarms.
✍
NOTE: The Automation Output can be
programmed to flash or be steady during alarm,
see Programming Step 68.
6
MNO
8
TUV
HOME
AWAY
PROGRAMMING STEP #68
PROGRAM
STORE PROGRAM
0 FOR FLASHING OUTPUT ON ALARM
1 FOR STEADY OUTPUT ON ALARM
6
MNO
9
WXY
HOME
AWAY
PROGRAMMING STEP #69
PROGRAM
STORE PROGRAM
0 FOR BING TONE OFF
1 FOR BING TONE ON
7
PRS
0
HOME
AWAY
PROGRAMMING STEP #70
PROGRAM
STORE PROGRAM
0 FOR CHIRPS OFF
1 FOR CHIRPS ON
7
PRS
1
HOME
AWAY
PROGRAMMING STEP #71
PROGRAM
STORE PROGRAM
0 FOR STANDARD TRIGGER
1 FOR FLASHING DURING
& AFTER ALARM
7
PRS
2
ABC
HOME
AWAY
PROGRAMMING STEP #72
PROGRAM
STORE PROGRAM
0 FOR STANDARD TRIGGER
1 FOR OUTPUT DURING ALARM
29
