8 - 2
No. 99MBC032A
8.1 Specifications
(1) Specifications
Display unit
Laser scanning speed 226 m/sec
Laser wavelength 650 nm (Visible)
Scanning rate 1600 scans/sec
Measuring region *5 ± 5 x 60 mm (± .2 x 2.36″)
Positional error *4 ± (2.0 + L/10) L : The gap between the workpiece center and optical-axis center. (mm)
(± .00008 + L/10000)″ [L : inch]
Positional error *3 ± 2.5 μm (± .0001″)
Linearity *2 ± 2.5 μm (± .0001″)
Repeatability *1 ± 0.6 μm (± .00003″)
Resolution 0.05 to 100 μm (.000002 to .005″)
Measuring range 0.5 to 60 mm (.02 to 2.36″)
Model No. LSM-9506
Code No. 544-116-1A (mm/inch)
16-digit dot-matrix type display (upper) + 11-digit 7-segment display (lower) and 7 guidance LEDs.
Measuring functions Segment specification: 1 to 7 (1 to 3 for transparent objects) Edge specification : 1 to 255 edges
Arithmetical average
Moving average
1 to 2048 times
32 to 2048 times
Averaging method
Tolerance judgment (±NG, GO), Multi-stage selection (7 stages), Offset/zero-set, Mastering, Group
judgment, Abnormal value elimination, Automatic workpiece detection, Setting the reference data,
Data output, Sample measurement, Statistical processing , Simultaneous measurement, Automatic
measurement with edge specification, Transparent object measurement (Segment: 1 to 3), Workpiece
position display, Key entry prohibition, mm ↔ E changeover, Dual-gage calibration, Setting the
resolution, Display of comma (“,”) to mark the thousandth digit, Setting the number of blank-out
digits, Setting the GO/NG judgment method, GO/NG judgment, Laser power deterioration monitoring.
Remark: There are some restrictions on the combination of the above functions.
Power switch Key switch
Protection class IP50
Mass Approx. 13 kg
Safety Compliance with EN61010-1 (OVER VOLTAGE CATEGORY II, POLLUTION DEGREE 2 )
0 to 40°C, 35 to 85% RH (without condensation)
Standard interface unit RS-232C, Footswitch, Digimatic output unit interface
Scanning control
signal connector
Standard accessory
Operating environment
100 ~ 240 VAC, ±10%, 50/60 Hz, 40 VA
Rated power supply
2000 m or lower
Operating altitude
-15 to +65°C, 20 to 90% RH (without condensation)
Storage environment
Remote interlock connector Standard accessory
*1: Value indicates repeatability (± 2σ) of ø60 mm range measurement at measuring interval of 0.32 sec. (average of 512 scans)
*2: Guaranteed when measured at the center of the measuring range in the ambient temperature of 20°C.
*3: optical-axis direction
*4: scanning direction
*5: Optical-axis direction x scanning direction (measuring range)
L
optical-axis center
workpiece
