Filter
Top Products
3 - 9
Bottom Panel
I/O Connector
The I/O connector provides the following:
• Supports DC charging of the terminal and battery
• Facilitates RS232 serial communications interface, including RX, TX, RTS, CTS and GND signals
• USB interface to a host workstation via HomeBase or communication cable
All Dolphin 6000 peripherals are designed to work exclusively through this connector. The I/O connector supports RS232 and
USB communication. For RS232, the maximum communication speed is 115.2 Kbps with seven baud rate settings. For USB,
communication speed is up to 480 Mbps.
Using the Touch Panel
Honeywell defines proper use of the terminal touch panel as using a screen protector and proper stylus. Screen protectors
maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applica-
tions that require a high to medium level of interface with the touch panel, such as signature capture for proof of delivery.
Honeywell advocates the use of screen protectors on all Dolphin devices. We recommend implementing a screen protector
replacement program to ensure that screen protectors are replaced periodically when signs of damage/wear are noticeable.
Replacement screen protectors can be purchased directly from Honeywell. Please contact a Honeywell sales associate for
details.
Pin Description
1GND
2 USB_5V_IN
3USB_D-
4USB_D+
5RTS
6UART1_RX
7UART1_TX
8GND
9CTS
10 GND
11 GND
12 Cradle_Detect
13 TXD
14 RXD
15 VDC_IN
16 VDC_IN
123456789101112131416 15