Filter
Top Products
12 Powering up
2 Basic functions
This section explains the basic functionality of
your phone. For more detailed explanation of
your phone’s features please refer to the
later chapters.
Powering up
To turn your phone on, press and hold the End
key and wait until the phone display lights up.
To turn your phone off, press and hold the
End
key until the phone turns off.
Making phone calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the main screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a while with no
signal, it changes to power save mode. When you
see “Power Save” on your phone’s screen, press
any key to return to normal operating mode. You
can make a phone call in one of the
following ways.
Call using a number
At the main screen:
1. Enter a phone number.
2. Press the Send key.
Call using a contact
At the main screen:
1. Select Contacts to open your contacts list.
2. Highlight a contact and press the Send key.
Call using voice commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
recognition” on page 63.
Redial a number
At the main screen:
1. Press the Send key twice to open your
call history.
2. Highlight a phone number or contact and
press the
Send key.
Tip: To redial the last number called, received or
missed, press the
Send key three times.
Answering phone calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your contacts list, the contact
name appears.
You can answer a phone call in one of the
following ways.
82-G1950-2EN.book Page 12 Tuesday, September 4, 2007 4:01 PM