Filter
Top Products
User Guide 43
11 Pictures
The following are some tips for you to operate
your phone’s camera:
• You cannot activate the camera while on an
active call or while browsing files in the
media gallery.
• Once the camera is active, the main screen acts
as the viewfinder.
• If you get a “Low memory” error, check your
resolution and quality compression settings.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits and
returns to the previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
Taking a picture
To take a picture:
1. Activate the camera in one of the
following ways:
– Press the
Camera key until the camera
screen appears.
– Select
Menu > Pictures >
Take a picture.
2. Focus on the image using the phone’s display
as a viewfinder.
3. Take a picture in one of the following ways:
– Press the
OK key.
– Press the
Camera key.
– Select
Capture.
4. The picture is saved to the
My pictures folder.
5. Select Send to create a picture message or
Erase to delete the picture from your phone.
6. Press the End key to exit picture mode.
Picture mode options
You can set up how your camera takes pictures.
While in picture mode, select
Options and one of
the following:
•
Settings displays the following camera settings
you may set up prior to taking a picture:
–
Flash sets the camera flash as Automatic,
On, or Off.
–
Resolution sets the horizontal and vertical
number of pixels for the picture.
–
Low light mode brightens the picture for
low light environments.
–
Self timer sets up a countdown timer to
automatically take a picture when the
timer expires. When set, the camera beeps
from 3 seconds down to the time the
shutter automatically snaps the picture
(unavailable for Multishot mode).
82-G1950-2EN.book Page 43 Tuesday, September 4, 2007 4:01 PM