Filter
Top Products
User Guide 53
Note: If it is a two-digit number, press the first
digit briefly, then press and hold the second digit.
For example, if the speed dialing location is 15,
press 1 briefly, then press and hold 5.
Any key
To set the phone to answer or silence calls when
you press any key, select
Menu > Settings >
Convenience > Any key > Any key answer (to
answer calls with any key except the
End, Back,
or
Navigation key) or Any key mute (to mute the
ringtone on incoming calls with any key except
the
Send or Speakerphone key).
Call options
Use Call options to customize the voice
commands.
Add voice dial
You can add a new voice dial to your phone.
1. Select Menu > Settings > Call options >
Add voice dial.
2. At the voice prompt, say a name.
3. At the voice prompt, repeat the name.
4. Select one of the following:
–
Add New creates a new contact.
–
Add to existing adds the voice tag to an
existing contact.
Erase voice dial
You can erase all existing voice dial tags from
your phone. Select
Menu > Settings >
Call options > Erase voice dial > Yes.
Voice training
If you phone is having trouble recognizing your
voice, you can train with the
Yes, No, and
Wake up commands. Select Menu > Settings >
Call options > Voice training > OK > Train All
or the item you want to train. Follow the prompts
for each word until training is complete.
Voice wake-up
You can set your phone to make a call using a
hands-free accessory.
Note: Voice wake-up does not work with
keyguard active.
Enable voice wake-up
Select Menu > Settings > Call options >
Voice wake-up > With accessory to enable calls
with an accessory.
Use voice wake-up
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear
two tones.
If the phone does not recognize your Wake Up
command, see “Voice training” on page 53.
82-G1950-2EN.book Page 53 Tuesday, September 4, 2007 4:01 PM