Filter
Top Products
CChhaarrggiinngg tthhee BBaatttteerryy
To use the charger provided with your phone, plug the end of the
adapter into the phone's charger port and the other end into an
electrical outlet. The charge time varies depending upon the
battery level. The maximum charge time for a fully discharged
battery is 3 hours.
WARNING! Use only the charger provided with the phone.
Using any charger other than the one included with the
DM-L200 may damage your phone or battery.
BBaatttteerryy CChhaarrggee LLeevveell
The battery charge level is shown at the top right of the LCD screen.
When the battery charge level becomes low, the low battery sensor
alerts you in three ways: sounding an audible tone, blinking the
battery icon, and displaying LOW BATTERY WARNING! If the battery
charge level becomes exceedingly low, the phone automatically
switches off and any function in progress is not saved.
TTuurrnniinngg tthhee PPhhoonnee OOnn aanndd OOffff
TTuurrnniinngg tthhee PPhhoonnee OOnn
1. Install a charged battery or connect the phone to an external
power source such as a cigarette lighter charger or hands-free
car kit.
2. Press for a few seconds until the LCD screen lights up.
TThhee BBaatttteerryy
The phone comes with a rechargeable battery. Keep the
battery charged while not in use in order to maximize talk
and standby time. The battery charge level is shown at the
top of the LCD screen.
IInnssttaalllliinngg tthhee BBaatttteerryy
To install, insert the battery into the opening on the back
of the phone and gently press down until the latch snaps
into place.
RReemmoovviinngg tthhee BBaatttteerryy
1. Make sure the power is off so that you don’t lose any
stored numbers or messages.
2. Press the battery release latch up and remove the battery
from the phone at a 45-degree angle.
STARTED
GETTING
16 17
NOTE: It is important to fully charge the battery
before initial use of the phone.
Fully Charged
Fully Discharged