Filter
Top Products
4.BASIC FUNCTIONS
29
4.4 Answering a Call
Receive a phone call using the handset.
1) When the phone is ringing, the “EXT” or “INT” symbol related to the incoming call flashes.
In the LCD Message area from system, message from system is displayed. At the
same time, in the Local message area, name and CID is displayed. The name is
displayed only when there is matched telephone number in the phonebook.
The user can accept an incoming internal or external call by pressing the button.
z Auto Talk: While the phone is charging mode you can answer the call by lifting
the handset from the base unit. This feature is enabled permanently.
4.4.1 Answering a External Call
1) Handset will ring and show a flashing “EXT” symbol.
2) Press button to answer a call “
” and “EXT” symbol is displayed steadily.
3) Press button again to end the call.The call duration and the current time are
displayed.
4.4.2 Answering a Internal Call
1) Handset will ring and show a flashing “INT” symbol.
2) Press button to answer a call “
“ and “INT” symbol is displayed steadily.
3) Press button again to end the call. The call duration and the current time are
displayed.
4.4.3 Ignoring a Call
1) You can ignore a call if you do not want to answer it by pressing “END” ( ) for shorter
than 1 second.
2) All ring and vibration will be stopped. But, the caller will hear ring back tone.
3) Press TALK ( ) to talk.
4.5 Call Transfer
This function is to transfer a received call to another user.
1) Talk
→
(Press shorter than 1 second)
→
Intercom number
→
.
While connected to a CO call (
or intercom call
).
1) Press
TRANS
( ) button shorter than 1 second and then the call is put on hold
state.
2) Dial intercom station number.
(ex. ipLDK-24: 10~41, ipLDK-100: 100~227, ipLDK-300: 100~399, ipLDK-300E:
1000~1599)
At this point, a user can make either a screened or unscreened call transfer.