Filter
Top Products
6.Programming Features
41
6.3.2 Base Choice
The wireless terminal, GDC-400H(GAP), can be subscribed to up to 4 GAP systems. However,
the wireless terminal can’t use all systems at the same time. Only one system selected by a
user is available for using the wireless terminal. This function is to select system that a user
wants to use. Please refer to ‘9.6 Change of Subscribed System’ for details.
If you are registered to more than one base, you can select which base to use, or let the
handset choose the strongest connection signal automatically.
1) Select Base Choice and press OK ( ) button.
BEST BASE and 4 bases are displayed on the LCD.
“BEST BASE”, “BASE 1”,..., “BASE 4”.
The base(s) where the current handset is subscribed to is displayed on the cursor when
enter into this menu. The base(s) not subscribed is(are) displayed dimly.
2) Select the desired base and press OK ( ) button.
If you select BEST BASE, the best base of all bases where the handset is subscribed to
is selected.
6.3.3 Modify PIN
The user can change H/S PIN Number.
1) Select Modify PIN menu and press OK ( ) button.
z “HS PIN : ” is displayed.
2) Input HS PIN number and press OK ( ) button.
z “NEW PIN : ” is displayed with valid tone.
3) Input new HS PIN number and press OK ( ) button.
z “RETYPE : ” is displayed.
4) Retype new HS PIN number and press OK ( ) button.
z PIN Number changes with valid tone and goes back to standby mode.
5) Default H/S PIN number :0000.
6.3.4 Base ID
The user can identify Base ID.
1) In Standby mode, press OK ( ) button.
2) Select Phone Settings menu.
3) Select Base ID menu and press OK ( ) button.
Base ID is displayed.
6.3.5 Reset
The user can clear Direct Call Number, Phonebook Number, and initialize all H/S Registration
Information, and H/S settings such as Language, Ring Type, Ring Volume, Display, Keypad
Tones to the default setting made in production phase.
6.3.5.1 Clear Phonebook Memory
1) Select Reset menu and press OK ( ) button. “HS PIN : ” is displayed.
2) Input “HS PIN” and press OK ( ) button to move into Reset submenus.
3) Select Phonebook menu and press OK ( ) button.
4) Press OK ( ) button to clear phonebook memory and CLIP. Dialed Calls are not
changed.