Filter
Top Products
7.Key System Functions
58
7.21.5 To delete the greeting
1) Press
TALK
( ) button.
2) Press
PROGRAM
( ) button longer than 1 second.
3) Press .
7.21.6 To record a paging message
1) Press
TALK
( ) button.
2) Press
PROGRAM
( ) button longer than 1 second.
3) Press .
4) Press # to start recording.
5) Press
PROGRAM
( ) button longer than 1 second or
END
( ) button.
Caution
This feature should be programmed at the admin station before using.
7.21.7 To delete a paging message
1) Press
TALK
( ) button.
2) Press
PROGRAM
( ) button longer than 1 second.
3) Press .
7.22 Date/Time Display
* This feature is not available in ipLDK-24/100/300/300E.
A current date and time will be displayed as;
1) Press
TALK
( ) button.
2) Press
PROGRAM
( ) button longer than 1 second.
3) Press .
7.23 Linked Station Pairs
Two stations can be linked with each other by programming. When two stations are linked, the
following functions are supported;
1) When a station is busy, the other idle linked station will not receive ring for CO lines,
transferred ring or ICM calls.
2) If one of two linked stations receives ICM/DISA/DID calls, then the other linked station
will receive ring together.
3) If any one station in a linked pair goes to DND state or pre-selected message display
state, then the other goes to the same state automatically. Also, if any one station in a
linked pair comes out of these states, then the other becomes to come out.
4) If one of two linked station is busy, the LCD of the other station will display “IN USE AT
LINK”.
5) If you have set DND function, you should be sure that the wireless terminal be in DND
state by pressing TALK ( ) button after setting DND function. Otherwise, because the
system sends setting information related to message of the wireless terminal about
every 3 minute, you should wait about 3 minutes. When you canceled DND function, you
should be sure that the wireless terminal be not in DND state by pressing TALK ( )
button after canceling DND function for the same reason, too.