Filter
Top Products
7.Key System Functions
51
7.7 Call Forward
When a user can’t receive calls, a user can forward all user’s calls to another subscriber’s
station.
1) Press
TALK
( )
button.
2) Press .
3) Press the call forward type:
Call Forward Type Call Forward Condition Call Forward Destination
0 Follow me Station No.
1 Unconditional Station, Intercom Group, or
VMIB (#)
2 Busy calls Station, Intercom Group, or
VMIB (#)
3 No answer calls Station, Intercom Group, or
VMIB (#)
4 Busy/No answer calls Station, Intercom Group, or
VMIB (#)
5/8 Station off-net (Unconditional) Speed Bin
6/9 Station off-net (No Answer) Speed Bin
# Remove
4) Dial station number, intercom group, or # for VMIB where calls are to be received.
(Confirmation tone will be heard.)
5) Press
TALK
( ) button.
* In case of DVIB forward, recording a greeting message should be preceded.
* In case of follow-me, dial Authorization Code after station number.
STOP!
; This feature lasts until canceled.
; This feature can’t be used in DND mode.
; This feature can be used by a subscriber that has permission.
; This feature should be programmed at the admin station before using.
7.7.1 To Cancel Call Forward
1) Press
TALK
( ) button.
2) Press Call forward code (Confirmation tone will be heard.).
or .
7.8 Do Not Disturb(DND)
When a user doesn’t want to receive a call, this function can be used.
7.8.1 To Program Do Not Disturb (DND)
1) Press TALK ( ) button.
2) Press .
3) (Confirmation tone will be heard)
7.8.2 To Cancel Do Not Disturb (DND)
1) Press TALK ( ) button.
2) Press or (Confirmation tone will be heard.)