Filter
Top Products
9. Installation of Wireless Terminal
60
9. Installation of Wireless Terminal
A user should do subscription procedure to use a wireless terminal with key system.
The procedure is an auto mode subscription. A user has to get only AC from the system
before subscription processing. The details are described in ‘9.2 Subscription’.
The wireless terminal is allowed to be subscribed to up to 4 GAP systems. If a user want to
subscribe to over 4 systems, the wireless terminal should be desubscribed from one of the
previous subscribed systems. The subscription procedure can be used for that by a user. Two
kinds of method are provided to desubscribe the wireless terminal from the key system.
The first is a desubscription in the system and the wireless terminal at the same time. The
details are described in ‘9.3 De-subscriptionⅠ’.
The second is a local desubscription in the system or in the wireless terminal separately.
The first procedure is recommended for a normal desubscription.
Warning
If a local de subscription is inevitably used by a user this should be informed to the attendant
station in order to get rid of subscription information of a local de subscribed terminal in the
system The details are described in ‘9.3 De-subscription II’.
9.1 System ID & Authentication Code
System ID is given to the ipLDK system attached the wireless terminal for identification. System
ID, which is PARK(Portable Access Rights Key), is written on the WTIB Board(System ID of
ipLDK system, which is PARK, is written on the MPB Board).
The detailed information is described in ‘Installation Manual’. Please, refer to the manual.
Authentication code is entered at only attendant station, before you begin to subscribe GDC-
400H(GAP) to ipLDK system or Home-DECT base station. You should get AC and PARK from a
system manager. The detailed information is described in ‘Installation Manual’.
In addition to the above, you should get station number of the wireless terminal to be subscribed
from a system manager.