Filter
Top Products
53-
i-mode
SETTING THE TIME OUT
This allows you to set the time limit for i-mode disconnection when there is no response from
the network:
SHOWING TABLES
You can choose whether or not tables should be displayed when available on i-mode webpages.
LOADING IMAGES
This allows you to choose whether or not your mobile can download and therefore display the
images contained on the webpages.
ADJUSTING TEXT
The text on webpages may not automatically fit the size of your mobile display. This setting al-
lows you to wrap the text and adjust it so that it fits the screen of your mobile.
READING CERTIFICATES
Certificates are used for network security exchange (e.g. for secure payment transactions).
SENDING TERMINAL INFO
To allow or forbid the automatic sending of mobile-related information (linked to the i-mode) to
the server.
SET HOMEPAGE
To define the homepage address. This allows you to access your favourite webpage via the Go
to webpage menu (see ii-mode applications, page 51).
CHECKING THE SETTINGS
You can check the status of all your settings via this menu.
GOING BACK
1 Select Set time out or press .
2
Select 60 seconds, 90 seconds or Disabled (if you do not want automatic disconnection).
3
Scroll down as many times as necessary until is highlighted and press OK to validate.
1 Select Show tables or press .
2
Select Yes or No.
3
Scroll down as many times as necessary until is highlighted and press OK to validate.
1 Select Load images or press .
2
Select Yes or No.
3
Scroll down as many times as necessary until is highlighted and press OK to validate.
1 Select Wrap text or press .
2
Select Yes or No.
3
Scroll down as many times as necessary until is highlighted and press OK to validate.
1 Select Certificates or press .
2 Select one of the Certificates available on the mobile and press OK. The selected certificate
is then displayed.
3 Press Cancel (left soft key) to return to the certificates list.
1 Select Send terminal info or press .
2 Select Yes or No.
3
Scroll down as many times as necessary until is highlighted and press OK to validate.
1 Select Set homepage or press .
2 Select Valid and enter the http:// address.
3
Scroll down as many times as necessary until is highlighted and press OK to validate.
1 Select Check settings or press to view the contents of each parameter.
1 Select Back or press to go back to the i-mode menu.