Filter
Top Products
64-
Settings
CALLING THE VOICE MAIL CENTRE TO CHECK YOUR MESSAGES
You can either:
-Dial the Voice Mail centre number directly after receiving a message:
- or:
PHONE SETTINGS
LANGUAGE SELECTION
You can change the language on your mobile:
AUTO FEATURES
AUTO-ANSWER
This feature is only operational when the phone is connected to a headset. The phone answers
the call automatically after about 5 seconds without the need to press a key.
AUTO-RETRY
This feature allows the phone to redial a number automatically if call has failed due to an en-
gaged line or an unavailable signal from the network. The number is re-dialled 10 times maxi-
mum until connection is established.
When activated, Retrying and a countdown timer are displayed prior to each new attempt. An
auto-retry warning tone beeps each time a new call attempt is made.
Selecting Exit or pressing any key during the retry process cancels the operation.
AUTO-SWITCH-ON/OFF
This feature allows the phone to switch on or off automatically at a pre-determined time.
If the phone is already on at automatic switch-on time, it remains on.
When the phone is about to automatically switch, off a warning message and a countdown timer
are displayed. Selecting Exit cancels the switch off process.
1
From the standby display, press and hold .
1 Press OK. Select Settings.
2 Select Voice Mail.
3 Select Call.
1
Press OK. Select Settings.
2 Select Phone settings.
3 Select Language.
4 Select a language from the list displayed and press OK to validate.
1
Press OK. Select Settings.
2 Select Phone settings.
3 Select Auto features.
4 Select Auto-answer and select On.
5 Select Save to store your setting.
1
Press OK. Select Settings.
2 Select Phone settings.
3 Select Auto features.
4 Select Auto-retry and select On.
5 Select Save to store your setting.
1
Press OK. Select Settings.
2 Select Phone settings.
3 Select Auto features.
4 Select Auto-switch-on or Auto-switch-off and select On to activate the feature.
5 Enter the time you want your mobile to switch on and/or to switch off and press OK.
6 Select Save to store your setting.