Filter
Top Products
Messages
27
2. When you connect to voice mail
and the prerecorded greeting
begins, follow the automated
instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in standby
mode, press and hold 1; or select
Menu > Messages > Voice messages >
Listen to voice messages to dial the
voice mailbox number. When you
connect and the prerecorded greeting
begins, follow the automated
instructions to listen to your voice
messages.
Automate voice mail
You can insert special characters called
dialling codes into phone numbers
such as voice mail, and save the
number to a speed dials location.
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string. See “Phone
numbers with dialling codes”, p. 27.
Voice mail services vary by network
operator. The following instructions
are examples of common operations.
Please check with your network
operator for specific instructions on
using your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-step.
Keep in mind that each voice mail
service may vary. However, it
should look similar to the following
example:
Dial 8585551212, pause 5 seconds,
press 1, pause 2 seconds, press
1234, and press #.
Phone numbers with
dialling codes
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string. To set up dialling
codes, do the following:
1. In standby mode, select Menu >
Contacts > speed dials.
2. Scroll to an (empty) speed dials
slot, and select Assign.
3. Enter your mailbox phone number,
including the area code.
Note: If the standard
Telecom New Zealand
mailbox number 083210 is
used, the area code is not
necessary..
9243644_6155_en_au.fm Page 27 Wednesday, December 28, 2005 11:28 AM