Filter
Top Products
Messages
28
4. Enter any dialling codes as
necessary after the entered phone
number.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice (two times 2.5
seconds) after the voice mailbox
number: 2145551212pp.
5. Enter any remaining pauses or
other information that enables you
to listen to your messages, and
select OK.
6. Enter a name (such as voice mail),
and select OK.
To dial and listen to your voice mail,
press and hold the assigned speed dials
key in standby mode.
Insert dialling codes
After having entered your desired
phone number, press * repeatedly to
cycle through dialling codes. When the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
+—Replaced by the international
access code.
w—Waits for you to press the call key
before sending the numbers or codes
that follow.
Clear voice mail icon
To clear the voice mail icon from the
display, in standby mode, select
Menu > Messages > Voice messages >
Clear voice message icon.
■ Web messaging
Web messaging is a network service.
See “Network services”, p. viii.
If your network operator supports this
feature, you can use the minibrowser
to check for e-mail messages.
In standby mode, select Menu >
Messages > Minibrowser messages >
Connect.
9243644_6155_en_au.fm Page 28 Wednesday, December 28, 2005 11:28 AM