Filter
Top Products
Organiser
71
5. If you do not enter an exchange
rate, the device will prompt you to
do so. Select OK. You can edit the
exchange rate at anytime.
■ Countdown timer
The countdown timer in your device
enables you to enter a specific time (up
to 99 hours and 59 minutes). When the
time runs out, your device sounds an
alarm.
Note: The countdown timer
only works when the device is
on. When you turn off your
device, the timer is no longer
active.
Set the timer
1. In standby mode, select Menu >
Organiser > Timer > Normal timer,
Interval timer, or Settings.
Normal timer measures the
countdown time for tasks that
have one period (timer name).
Interval timer saves sets of
countdown times with more than
one period.
2. Enter the time (in hh:mm:ss
format), and select OK.
3. Enter a note for the timer, and
select Start.
appears in standby mode with the
countdown timer set. When the time
runs out, your device sounds an alarm,
displays the timer note, vibrates (if
set), and flashes its lights.
Press any key during the alarm to stop
the alarm. After 30 seconds the timer
alert stops automatically.
Change the time
After you have set the timer, you can
change the time.
1. In standby mode, select Menu >
Organiser > Timer > Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a
new note; select Start.
Interrupt the timer
After you have set the timer, you can
stop the timer. In standby mode, select
Menu > Organiser > Timer > Stop
timer.
■ Stopwatch
You can use the stopwatch in your
device to track time. The stopwatch
displays time in hours, minutes,
seconds, and fractions of a second in
hh:mm:ss:s format.
Using the stopwatch or allowing it to
run in the background when using
other features increases the demand
on battery power and reduces the
battery life.
9243644_6155_en_au.fm Page 71 Wednesday, December 28, 2005 11:28 AM