Filter
Top Products
Settings
52
■ Time and date
settings
Clock
In standby mode, select Menu >
Settings > Time and date > Clock >
Show clock or Hide clock, Set the time,
Time zone or Time format.
Date
In standby mode, select Menu >
Settings > Time and date > Date >
Show date or Hide date, Set the date,
Date format, or Date separator.
Date and time auto-update
Auto-update is a network service.
See “Network services”, p. viii. If your
network operator supports this feature,
you can allow the digital network to
set the clock, which is useful when you
are out of your home area, for instance
when you have traveled to another
network or time zone.
In standby mode, select Menu >
Settings > Time and date > Auto-
update of date & time > On, Confirm
first, or Off.
If you use the Auto-update of date &
time option while outside your digital
network, you may be prompted to
enter the time manually. Network time
will replace the time and date when
you reenter your digital network.
If your battery has been removed or
has discharged outside the digital
network, you may be prompted to
enter the time manually (when the
battery is replaced or recharged, and
you are still outside of the digital
network).
■ Call settings
Anykey answer
Anykey answer enables you to answer
an incoming call. Briefly press any key
except the right selection or end key.
In standby mode, select Menu >
Settings > Call > Anykey answer >
On or Off.
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in a
fast busy signal when you dial.
With automatic redial activated, your
device redials the number (number of
times is specified by the network), and
notifies you when the network is
available. In standby mode,
select Menu > Settings > Call >
Automatic redial > On or Off.
Speed dials
You can activate or deactivate speed
dials. In standby mode, select Menu >
Settings > Call > Speed dials > On or
Off. See “Set up speed dials”, p. 34.
9243644_6155_en_au.fm Page 52 Wednesday, December 28, 2005 11:28 AM