Filter
Top Products
Settings
58
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
circumstances.
Hands-free operation
You can set as many as 16 voice
commands to enable hands-free
operation of certain features in your
device.
Assign a voice tag to a
command
Before using voice commands, you
must first add a voice tag to the device
function.
1. In standby mode, select Menu >
Settings > Voice commands.
2. Select the device function you
want to tag: Profiles, Voice
mailbox, Radio, Infrared, Voice
recorder or Call register.
3. If necessary, select an option
associated with that function.
4. Select Add, and speak the voice tag
clearly into the microphone. Do not
select Quit unless you want to
cancel the recording.
The device replays and saves the
recorded tag. appears next to
commands with voice tags assigned.
Activate a voice command
After you have associated a voice tag
with a function in your device, to issue
a command, speak the voice tag.
1. In standby mode, press and hold
the right selection key or voice key.
2. With Speak now displayed,
pronounce the voice tag clearly
into the microphone.
With the voice tag found, the device
displays Found:, and plays the
recognised voice tag through the
earpiece. The function you requested is
activated.
Options
After you have associated a voice tag
to a command, you can select one of
the following options:
Playback—Listen to the voice
command tag.
Change—Change the voice command.
Delete—Erase the voice command tag.
9243644_6155_en_au.fm Page 58 Wednesday, December 28, 2005 11:28 AM