Filter
Top Products
Settings
63
Roaming options
You can set your device to roam or
search for another network when you
are not in your home area.
1. In standby mode, select Menu >
Settings > Network > Roaming
options and one of the following
options:
Automatic—The device
automatically searches for service
in another digital network. With no
service found, the device uses
analog service. The roaming rate
applies when not in the home
service area.
2. Select OK, if necessary, to confirm
the activation.
Mode
You can choose whether your device
uses digital or analog service.
In standby mode, select Menu >
Settings > Network > Mode and one of
the following service options:
Digital only—The device only works in
digital mode.
■ Network services
The following features are network
services. See “Network services”, p. viii.
Store a feature code
1. In standby mode, select Menu >
Settings > Network services >
Network feature setting.
2. Enter the feature code from your
network operator (for example,
*633), and select OK.
3. Select the type of service that
matches the feature code you
entered (for example, Call divert).
The activated feature code is now
stored in your device, and you are
returned to the Feature code: field.
Continue entering other feature
codes (for example, *633), or press
the end key to return to standby
mode. When you enter a network
feature code successfully, the
feature becomes visible in the
Network services menu.
9243644_6155_en_au.fm Page 63 Wednesday, December 28, 2005 11:28 AM