Filter
Top Products
[ 54 ]
Execute a voice command
WITHOUT THE HEADSET
After you have associated a voice tag with a command, execute the
command as follows:
1 At the start screen, select and hold Names.
Please speak now appears in the display.
2 Pronounce the tag for one of the five available commands.
3 Found: <command> appears in the display and the command
is executed.
WITH THE HEADSET
After you have associated a voice tag with a command, you can also
execute voice commands using the optional HDC-9P headset.
1 At the start screen, press and hold the remote button on the headset.
The phone beeps and Please speak now appears in the display.
2 Pronounce the tag for one of the five available commands.
Found: <command> appears in the display and the command
is performed.
Tip: You can also execute voice commands by pressing and holding
the down volume key on the side of the phone.
Change or delete an existing voice command tag
1 From the menus, select Voice > Voice commands.
2 Scroll to the voice command you wish to modify; then select Options.
3 Select Change or Delete.
a) If you selected Change, select Start; then record the new tag.
b) If you selected Delete, select OK to delete the command.
6340i.ENv1_9310019.book Page 54 Thursday, July 10, 2003 3:21 PM