Filter
Top Products
[ 73 ]
Phone security
• If you try to add a name (without a number) to the fixed dialing list,
you receive an error message.
• If you try to browse the fixed dialing list, but have not stored any
numbers, Fixed dialing list empty appears in the display.
• You cannot access SIM memory manually (view or copy numbers on
the SIM card) while fixed dialing is active.
• ACCESS CODES
Use access codes to change your security code, PIN code, and PIN2 code.
Note: Avoid using codes similar to emergency numbers such as
911 to prevent accidental dialing of the emergency number.
Security code
The security code controls access to features such as the security level and
is supplied with the phone. The preset code is 12345.
Note: If you enter the wrong security code five times in succession,
you will not be able to enter a code for five minutes, even if you
power off the phone between incorrect entries.
Once you change the security code from its preset of 12345, keep the new
code secret, and in a safe place separate from your phone. Use this
procedure to change your security code.
1 From the menus, select Settings > Security settings > Access
codes > Change security code.
After a brief pause, you are prompted to enter the current security
code (default is 12345).
2 Enter the current security code and select OK.
You are prompted to enter the new security code.
3 Enter the new security code (up to 10 characters) and select OK.
You are prompted to reenter the new security code for verification.
4 Enter the new security code again and select OK.
A message appears confirming your security code has been changed.
6340i.ENv1_9310019.book Page 73 Thursday, July 10, 2003 3:21 PM