Filter
Top Products
[ 75 ]
Phone security
PIN2 Code
The PIN2 code is required for features such as fixed dialing. If you enter
an incorrect PIN2 code three times in succession, the PIN2 code is blocked
and you have to enter the PUK2 code.
Note: The original PIN2 code must be obtained from your
wireless provider.
1 From the menus, select Settings > Security settings > Access codes >
Change PIN2 code.
You are prompted to enter the current PIN2 code.
2 Enter the current PIN2 code and select OK.
You are prompted to enter the new PIN2 code.
3 Enter the new PIN2 code and select OK.
You are asked to verify the new PIN2 code by entering it again.
4 Enter the new PIN2 code again and select OK.
A message appears confirming that you have changed the PIN2 code.
PUK (personal unblocking key) codes
PUK and PUK2 codes are used to restore blocked PIN and PIN2 codes.
Both PUK and PUK2 codes are eight characters in length and cannot
be changed. PUK and PUK2 codes must be obtained from your
wireless provider.
Note: If you enter an incorrect PUK or PUK2 code 10 times in
succession, the message SIM rejected appears in the display
and the SIM card can no longer be used. You must contact your
wireless provider for a new SIM card.
6340i.ENv1_9310019.book Page 75 Thursday, July 10, 2003 3:21 PM