Filter
Top Products
[ 71 ]
Phone security
1 From the menus, select Settings > Security settings > Security level.
After a brief pause, you are prompted to enter the security code.
The default code is 12345. Nokia recommends that you change the
code as soon as possible.
2 Enter the security code and select OK.
3 Select one of the following options:
Off—Owner and nonowner cards are treated the same.
Memory—Nonowner cards can access SIM memory. Any changes to
the memory setting requires the security code. The owner card has
access to all features, but the security code is required to change a
memory setting.
Phone—The security code is required upon power-up.
• FIXED DIALING
Once you set up and activate a fixed dialing list, your phone can make
calls only to those numbers that you have defined in the fixed dialing list.
Fixed dialing is a network feature and must be supported by your
wireless provider.
Note: With fixed dialing activated, calls still may be possible to
the official emergency number programmed into your phone.
Set up and activate
Note: If you activate fixed dialing and the number list is empty, all
outgoing calls, except for emergency numbers such as 911, require
entry of the PIN2 code.
1 From the menus, select Settings > Security Settings > Fixed dialing.
The options in the following table appear in the display:
On—Activate fixed dialing (see “Notes” on page 72).
Off—Deactivate fixed dialing.
Number list—View the numbers in your fixed dialing list.
6340i.ENv1_9310019.book Page 71 Thursday, July 10, 2003 3:21 PM