Filter
Top Products
For example, you can add wireless LAN (WLAN) and
packet data access points to an internet access point
group and use the group for browsing the web. If
you give WLAN the highest priority, the device
connects to the internet through WLAN if available
and through packet data if not.
To create a new access point group, select
Options > Manage > New destination.
To add access points to an access point group, select
the group and Options > New access point. To
copy an existing access point from another group,
select the group, an existing access point, and
Options > Organise > Copy to other dest..
To change the priority order of access points within
a group, select an access point and Options >
Organise > Change priority.
Packet data access points
Press , and select Tools > Settings >
Connection > Destinations > New access
point, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with
, and select Edit.
Follow the instructions from your service provider.
Select from the following:
● Access point name — You obtain the access
point name from your service provider.
● User name — The user name may be needed to
make a data connection, and is usually provided
by the service provider.
● Prompt password — If you must enter the
password every time you log in to a server, or if
you do not want to save your password in the
device, select Yes.
● Password — A password may be needed to
make a data connection and is usually provided
by the service provider.
● Authentication — Select Secure to always send
your password encrypted or Normal to send
your password encrypted when possible.
● Homepage — Depending on the access point
you are setting up, enter the web address or the
address of the multimedia message centre.
Select Options > Advanced settings and from the
following:
● Network type — Select the internet protocol
type to transfer data to and from your device. The
other settings depend on the selected network
type.
● Phone IP address (for IPv4 only) — Enter the IP
address of your device.
Settings
187
Settings