Tools
107
Copyright © 2006 Nokia. All rights reserved.
IPv6 settings > DNS address—Select Automatic, Well-
known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select User defined.
Proxy serv. address—Enter the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Also, starting an
active packet data connection is quicker (for example, to
send and receive e-mail). If you select When needed, the
device uses a packet data connection only if you start an
application or action that needs it. If there is no packet
data coverage and you select When available, the device
periodically tries to establish a packet data connection.
Access point—The access point name is needed to use your
device as a packet data modem to your PC.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your device, view, or delete
them in Configurations.
Date & time
See ‘Clock settings’, p. 15.
See also the language settings in ‘General’, p. 101.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See ‘Glossary of PIN and
lock codes’, p. 108.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See ‘Glossary of PIN and
lock codes’, p. 108.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the emergency
number.
If you forget any of these codes, contact your service
provider.