Filter
Top Products
Media applications
63
Copyright © 2006 Nokia. All rights reserved.
support Visual Radio. The Visual Radio service may not be
available in all areas and countries.
You can normally make a call or answer an incoming call
while listening to the radio. The radio is muted when there
is an active call.
The radio selects the used frequency band based on the
country information received from the network. If this
information is not available, you may be asked to select the
region where you are located, or you can select the region
in the Visual Radio settings.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
Press , and select Media > Radio. To start a station
search, select or and press the joystick. To
change the frequency manually, select Options > Manual
tuning.
If you have previously saved radio stations, select or
on the display and press the joystick to go to the next
or previous saved station, or press the corresponding
number key to select the memory location of a station.
To adjust the volume, press and hold or on the left
side of the device. To listen to the radio using the
loudspeaker, select Options > Activate loudspeaker.
To view available stations based on location, select
Options > Station directory (network service).
To save the current tuned station to your station list,
select Options > Save station. To open the list of your
saved stations, select Options > Stations.
To return to the standby mode and leave the FM radio
playing in the background, select Options > Play in
background.
View visual content
To check availability and costs and to subscribe to the
service, contact your network operator or service provider.
To view available visual content for a tuned station, select
or Options > Start visual service. If the visual
service ID has not been saved for the station, enter it, or
select Retrieve to search for it in the station directory
(network service).
When the connection to the visual service is established,
the display shows the current visual content.