Filter
Top Products
Make calls
33
Copyright © 2006 Nokia. All rights reserved.
1 To start voice dialling, press and hold the right
selection key. If you are using a compatible headset
with the headset key, press and hold the headset key to
start voice dialling.
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3 The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number.
If the recognised contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialling.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
Answer or reject a call
To answer the call, press or open the slide cover.
To mute the ringing tone when a call comes in, select
Silence.
Tip! You can also use the key on the remote
control to answer and end a call.
If you do not want to answer a call, press to reject
it. If you have activated the Call divert > If busy function
to divert calls, rejecting an incoming call also diverts the
call. See ‘Call diverting’, p. 110.
When you reject an incoming call, you can also select
Send text message to send a message to the caller
informing why you cannot answer the call. You can edit
the text before sending it. To set up this option and write
a standard text message, see ‘Call settings’, p. 102.
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting in Settings >
Call > Call waiting.
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see ‘Profiles—Set tones’, p. 28.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself from