Filter
Top Products
Preparation
16 For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the handset
Connecting the AC adaptor
LUse only the included Panasonic AC
adaptor PQLV203.
Battery installation
Insert the battery (A), and press it down
until it snaps into the compartment (B).
Then close the handset cover.
Battery charge
Place the handset on the charger for 4
hours before initial use.
While charging, the CHARGE indicator on
the charger lights. When the battery is fully
charged, “Charge completed” is
displayed.
Note:
LIf you want to use the handset
immediately, charge the battery for at
least 15 minutes.
LTo ensure that the battery charges
properly, clean the charge contacts of
the handset and charger with a soft, dry
cloth once a month. Clean more often if
the unit is subject to grease, dust, or
high humidity.
Battery strength
Note:
LWhen the battery needs to be charged,
the handset beeps intermittently while it
is in use.
(120 V AC,
60 Hz)
A
B
Battery icon Battery strength
1 Fully charged or high
2 Medium
3 Low
Flashing: needs to be
recharged.
4 Discharged
TH102-C.book Page 16 Monday, March 13, 2006 2:41 PM