Programmable Settings
46 For assistance, please visit http://www.panasonic.com/phonehelp
Ringer settings
Important:
LMany of the following features can be
programmed using the MULTI TALK V
USB Utility. Refer to the help section of
the MULTI TALK V USB Utility application
for more information (page 4).
Ringer volume Y o
1 {MENU} (center of joystick) i f
i {SELECT}
2 “Ringer volume” i {SELECT}
3 Select the desired line.
4 Select the desired volume. (Default:
High)
LTo turn the ringer off, push {V}
repeatedly until “Off ?” is displayed.
5 {SAVE} i {OFF}
1 {MENU} i f i {SET}
2 “Ringer volume” i {SET}
3 Select the desired line.
4 Select the desired volume. (Default:
High)
LTo turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
5 {SET} i {STOP}
Note for handset and base unit:
LWhen the ringer volume is set to off for a
line, “Ringer off” is displayed and the
handset or base unit does not ring for
outside calls received on that line.
Ringer tone Y o
You can change the ringer tone heard
when an outside call is received.
Important:
LYou can record songs for the handset
ringer tone from an audio device (page
47).
LYou can copy songs (in WAV file format
using a computer) to be used for the
handset ringer tone. Refer to the help
section of the MULTI TALK V USB Utility
application for more information (page
4).
1 {MENU} (center of joystick) i f
i {SELECT}
2 “Ringer tone” i {SELECT}
3 Select the desired line.
4 Select the desired item. (Default: Line
1: “Tone 1”, Line 2: “Tone 2”) i
{SAVE} i {OFF}
Note:
LIf you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (tone 1 to 3) for the handset ringer
tone. If you select a melody or a song,
you cannot distinguish lines by their
ringers.
LIf you select a melody or a song for the
handset ringer tone, the ringer continues
to sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
Handset
Base unit
Handset
TH102-C.book Page 46 Monday, March 13, 2006 2:41 PM