Filter
Top Products
C
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp 27
Using the base unit o
1 Dial the phone number.
LTo correct a digit, press {ERASE}.
2 {SP-PHONE}
LAn available line is automatically
selected and {LINE1} or {LINE2}
lights.
3 When the other party answers, speak
into the MIC.
LSpeak alternately with the other party.
4 When you finish talking, press {SP-
PHONE}.
Note:
LYou can also select a line by pressing
{LINE1} or {LINE2} in step 2.
LTo change the line selection, see page
51.
LUse the speakerphone in a quiet
environment.
LWhile on a call, you can switch from the
base unit to the handset by pressing
{LINE1} or {LINE2} on the handset,
then pressing {SP-PHONE} on the base
unit.
Adjusting the speaker volume
Press {^} or {V} while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1 {REDIAL}
2 Press {^} or {V} to select the desired
number.
LTo erase the displayed number, press
{ERASE}.
3 {SP-PHONE}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1 {9} i {PAUSE} i Dial the phone
number.
2 {SP-PHONE}
Note:
LA 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
TH102-C.book Page 27 Monday, March 13, 2006 2:41 PM