Panasonic KX-TH102-C Cell Phone User Manual


 
i
Answering System
For assistance, please visit http://www.panasonic.com/phonehelp 57
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to the message.
Press {SP-PHONE} during playback.
Note:
LTo edit the number before calling back,
press {EDIT} to select the desired
format (page 38).
Erasing messages o
Erasing a message
Press {ERASE} during playback.
Erasing all messages
Press {ERASE} 2 times while the base
unit is not being used.
LTo erase the messages for the desired
line, press {LINE SELECT} repeatedly
to select the desired line(s), then press
{ERASE} 2 times.
Listening to messages
using the handset
When new messages have been
recorded:
–“New message” is displayed.
The message indicator on the handset
flashes slowly if the message alert
feature is turned on (page 63).
1 {MENU} (center of joystick)
2 i i {SELECT}
LThe handset plays new messages
including memo messages.
LWhen you have no new messages,
the handset plays back all messages.
3 Press {OFF} when finished.
Note:
LTo switch to the receiver, press {C}.
Adjusting the receiver/speaker volume
Push {^} or {V} while listening to a
message.
Voice guidance
If you do not press any buttons after the
last message is played back, the unit’s
voice guidance starts. Operate the
answering system by following the
guidance as necessary.
TH102-C.book Page 57 Monday, March 13, 2006 2:41 PM