Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 81
Making/answering calls, intercom
Problem Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
LMove the handset and the base unit away from other
electrical appliances (microwave, wireless LAN
appliance, etc.).
LMove closer to the base unit.
LRaise the base unit antennas.
LTurn on the clarity booster feature (page 29).
LIf your base unit is connected to a telephone line with
DSL service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
The handset and base
unit do not ring.
LThe ringer volume is turned off. Adjust it (page 46, 68).
I cannot make a call. LThe dialing mode may be set incorrectly. Change the
setting (page 24).
LThe base unit (including answering system) or another
handset is in use. Try again later.
I cannot redial by
pressing {REDIAL}.
LIf the last number dialed was more than 48 digits long,
the number will not be redialed correctly. Dial the
number manually.
I cannot have a
conversation using the
headset.
LMake sure that a Panasonic optional headset is
connected properly (page 77).
LYour optional Bluetooth headset is not registered.
Register it (page 77).
LIf “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
I cannot make long
distance calls.
LMake sure that you have long distance service.
I cannot page the
handset or base unit.
LThe called handset is too far from the base unit.
LThe called unit is in use. Try again later.
I cannot turn the clarity
booster feature on.
LThe resources available for wireless communication
(making or answering calls with another handset,
monitoring camera images from a computer, etc.) are
limited. Wait for the other user to end the operation and
try again.
The interrupt tones sound
while I am on an outside
call or on an intercom call
or monitoring a room.
LA call is being received. Press {OFF} to end the call or
stop monitoring, then answer the call.
TH102-C.book Page 81 Monday, March 13, 2006 2:41 PM