Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 85
Battery recharge
I cannot make or answer
cellular calls with the
handset or base unit.
LDepending on the cellular phone’s compatibility, you
may not be able to make or answer cellular calls even if
you could register and connect the cellular phone to the
base unit.
LConfirm that you have registered your cellular phone to
the base unit using the cellular phone (page 64). Refer
to the operating instructions of your cellular phone for
registration.
LConfirm that your cellular phone is turned on.
LConfirm that your cellular phone is connected to the
base unit (page 65).
LConfirm that your cellular phone is placed within the
range of the base unit.
LIf someone is talking on a cellular call or customizing
the cellular settings, you cannot use cellular feature.
There can be only one active Bluetooth connection at a
time.
I can make or answer
cellular calls but cannot
hear a sound.
LThe Bluetooth technology on your cellular phone may
not be functioning normally. Turn off and on your cellular
phone.
LDisconnect and connect the base unit AC adaptor and
try again.
I cannot switch cellular
calls between the base
unit and cellular phone.
LYour cellular phone may not support this feature. Refer
to the operating instructions of your cellular phone.
I cannot register the
Bluetooth wireless
headset to the base unit.
LConfirm that your Bluetooth wireless headset supports
the headset profile (HSP) specification. If it does not,
you cannot register it to the base unit.
Problem Cause & solution
I charged the battery fully,
but 3 continues to
flash, or 4 is
displayed.
LThe battery may need to be replaced with a new one
(page 17).
The handset display is
blank.
LConfirm that the battery is properly installed.
LFully charge the battery (page 16).
Problem Cause & solution
TH102-C.book Page 85 Monday, March 13, 2006 2:41 PM