Panasonic KX-TH102-C Cell Phone User Manual


 
Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 51
Setting telephone line Y o
Line selection
The line selection mode determines which
line is selected when you press {C} on
the handset or {SP-PHONE} on the base
unit.
–“Auto”: When making a call, line 1 is
selected. If that line is unavailable, line 2
is selected. When answering a call, the
ringing line is selected.
–“Line1”: Line 1 is selected.
–“Line2”: Line 2 is selected.
1 {MENU} (center of joystick) i h i
{SELECT}
2 Set tel linei {SELECT}
3 Line selecti {SELECT}
4 Select the desired setting. (Default:
Auto”) i {SAVE} i {OFF}
Note:
LYou can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
1 {MENU} i h i {SET}
2 Set tel linei {SET}
3 Line selecti {SET}
4 Select the desired setting. (Default:
Auto”) i {SET} i {STOP}
Note:
LYou can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
Flash time
The flash time depends on your telephone
exchange or host PBX.
LYou only need to program this setting
once, using either the handset or base
unit.
Important:
LThe setting should stay at 700 ms unless
pressing {FLASH} fails to pick up the
Call Waiting call.
1 {MENU} (center of joystick) i h i
{SELECT}
2 Set tel linei {SELECT}
3 Set flash timei {SELECT}
4 Select the desired line.
5 Select the desired setting. (Default:
700ms”) i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 Set tel linei {SET}
3 Set flash timei {SET}
4 Select the desired line.
5 Select the desired setting. (Default:
700ms”) i {SET} i {STOP}
Note for handset and base unit:
LIf the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Handset
Base unit
Handset
Base unit
TH102-C.book Page 51 Monday, March 13, 2006 2:41 PM