Filter
Top Products
Polycom VVX 300 and 310 Business Media Phones User’s Guide Version 5.0.0
Polycom, Inc. 27
To redial a number:
» From the Placed Calls list, as shown next, press Dial.
Use the up and down arrow key to select other previously placed calls.
Ending Calls
You can end an active call in the following ways:
Place the handset on the cradle.
From Lines or Calls view, press End Call.
In Calls view, highlight the call before you press End Call.
To end a held call:
» From Calls view, select the held call, and press Resume > End Call.
Using Headsets
You can connect an analog headset to your phone. If an analog headset is connected and in use,
glows green.
If you use a headset, you can set up your phone so that all calls use your headset (see Enabling Headset
Memory Mode). If you use a headset that supports electronic hookswitch (EHS), you can press the
hookswitch button to place, answer, and end calls. In addition, you can mute calls and control the volume
from your headset.
For information about how to connect a headset to your phone, see the Quick Start Guide for your phone,
which is available on the Polycom Business Media Phones web page.
For information about your headset’s features and how to sync your headset with your phone, see your
headset’s documentation.
For a list of supported headsets, see the Headset Compatibility List (Technical Bulletin 37477). For detailed
information about how to use electronic hookswitch, see Using an Electronic Hookswitch (Technical Bulletin
35150). All of these documents are available on the Polycom Profiled UC Software Features and Polycom
Engineering Advisories and Technical Notifications support pages.