Filter
Top Products
19
•
Empty
: (locations 9-#) allows you to program an additional set of
frequently used features.
–
Select an empty slot and press the
key.
–
Use the Menu and Navigation keys to select a feature, then press the
Options
➔
Assign
soft key
or the
key.
In some functions, you may be asked for a password or PIN.
Enter the code and press the Select soft key or the key.
When you access a list of options, your phone highlights the
currently active option. If, however, there are only two options,
such as On/Off or Enable/Disable, your phone highlights the
option that is not currently active, so that you can select it
directly.
Selecting Options
To view the various functions and options available and to select
the one you want:
•
Press the appropriate soft key.
•
To select the function displayed or the option highlighted, press the
Select
soft key or the
key.
•
To view the next function or highlight the next option on a list, press the
Down
Navigation key.
•
To move back to the previous function or option on a list, press the
Up
Navigation key.
•
To move back up one level in the menu structure, press the
Back
soft
key.
•
To exit the menu structure without changing the settings, press the
key.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys: Left and
Right .
Soft Keys
The roles of the soft keys vary depending on the function you are
currently using; the labels on the bottom line of the display just
above each key indicate their current role.
Left Soft Key
Some functions of the left soft key are as follows.
•
In the Idle screen, press the
Options
(left) soft key to open the
My Menu screen.
•
When in a menu mode, the left soft key function is
Select
.
Right Soft Key
Some functions of the right soft key are as follows.
•
In the Idle screen, press the
Menu
(right) soft key to display the
nine menu icons. See ‘Selecting Functions and Options” on page 18.
•
When in a menu mode, the right soft key function is
Back
.
a777.book Page 19 Friday, September 26, 2008 4:08 PM