Filter
Top Products
Call Functions 28
4.
Enter the password and press the OK soft key or the
key.
5. Press the Back soft key or press to exit this display.
Data Call Time
1. From the Idle Screen, press Menu soft key, then select
My
Stuff
➔ Tools ➔ Recent Calls ➔ Data Call Time. The
following options are available:
• Last Data Call
: shows the time used for the last data call sent or
received since the last time this counter was reset.
• Total Data Call
: shows the total time used to send or receive data
since the last time this counter was reset.
2. Use the Up and Down Navigation keys to scroll through the
information.
3. To set the counter back to zero, press the
Reset
soft key.
You will be prompted for a password.
4. Enter the password and press the OK soft key or the
key.
5. Press the Back soft key or press to exit.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the
Volume
keys on the left side of the phone.
Press the upper button to increase the volume level and press
the lower button to decrease the volume level.
In Idle mode, you can also adjust the ringer volume using these
same keys.
Note:
Press one of the volume buttons to immediately silence the tone of an
incoming call or an alarm.
Putting a Call on Hold
You can place the current call on hold whenever you want. You
can also make another call while you have a call in progress if
your network supports this service.
To put a call on hold:
1. While on a call, press Options soft key, then select Hold.
This action places the current caller on hold (which is
displayed onscreen as a greyed-out box).
a777.book Page 28 Friday, September 26, 2008 4:08 PM