Filter
Top Products
Call Functions 32
2.
To switch between the two calls, press Options soft key,
then select Swap.
•Swap
: Places the current call on hold and then activates the
previous call.
To end a call on hold:
1. Press the Options soft key, then select End ➔
Held Call
.
2. Press to end the current active call.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of
incoming calls and place them on hold. If this service is
supported by the network, all calls can be joined together. You
are notified of an incoming call by a call waiting tone.
Note:
The Join option combines all of the calls you have established with
your phone (both active and on hold).
Swap places the current call on hold and then activates the previous
call.
1. Press to answer the first incoming call.
2. Press to answer the next incoming call. The first call
is automatically put on hold.
3. Join the first two callers by pressing the Options soft key,
then selecting Join.
•Join
: combines your current set of callers into a single multi-party
call (both active and on hold).
4. Press to end the call.
Silent Mode
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater, for example.
In
Idle
mode, press and hold until the phone vibrates, the
“Silent Profile on” message appears on screen. Both the Silent
mode and Vibration icons are displayed on the screen.
(For more information, refer to “Sound Profile” on page 76.)
In Silent mode, your phone’s speakers are muted. An incoming
call causes the phone to vibrate and light up, depending on the
settings of the Silent Phone Settings feature.
To exit and reactivate the previous sound settings, press and hold
again until “Normal Profile on” displays. The Silent mode
and Vibrate icons are no longer displayed.
a777.book Page 32 Friday, September 26, 2008 4:08 PM