Filter
Top Products
70
•Home URL
: enter the URL address of the page to use as your
homepage.
• Gateway Address
(WAP only): The gateway address of the
proxy server.
• Proxy Address
(HTTP only): The proxy server address and
port.
• Secure Connection
(WAP only): Determines if the connection
will follow a secure protocol.
• Linger Time (sec.)
: A time period (in seconds) after which the
network is disconnected if there has been no new data traffic
in that time.
• Advanced
: Configure some of the IP-specific information.
–
Static IP
: Specify if you want to manually enter an P address.
Remove the check mark if you want the server to
automatically assign the P address.
–
Local phone IP
: The P address obtained from the network
operator, if you checked the Static P option.
–
Static DNS
: Specify if you want to manually enter the Domain
Name Server (DNS) address. Remove the check mark if you
want the server to automatically assign the P address.
–
Server 1/Server 2
: The Domain Name Server (DNS)
addresses.
–
Traffic Class
: The traffic class.
Press
OK
to exit Advanced.
6. Press
Save
to save these settings.
Note:
The WAP settings may vary depending on the service
provider.
Bluetooth
Bluetooth is a short-range wireless communications
technology capable of exchanging information over a distance
of about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within
connectivity range of one another, you can exchange
information between them, even if they are located in different
rooms.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.