Filter
Top Products
Getting Started 8
Powering On the Phone
1. Press and hold . The
startup animation plays
followed by the appearance
of the
Home
screen in the
display (as shown).
Note:
As with any other radio-transmitting
device, do not touch the antenna (at
the bottom of the device) while
using your phone as this can affect
call quality and can cause the phone
to operate at a higher power level
than is necessary.
2. If the phone functions are disabled, the “
Phone off
”
message and the No Service icon ( ) appear in the
display. To enable the phone functions, do the following:
•
Press and hold the Lock key ( ) at the top right side of your
phone. The
Quick List
menu appears in the display.
•
Select the
Wireless Manager
option. The
Wireless Manager
screen appears in the display. For more information, refer to
“Wireless Manager”
on page 117.
•
Select the
Phone
option. The Phone option setting switches from
Off
to
On
.
•
Press the
Done
soft key.
•
Press .
3. The phone begins searching for a network signal.
4. Once the phone finds a signal, the time, date, and day
appear in the second line of the display.
5. You’re now ready to place and receive calls.
Note:
If you are outside of your carrier’s coverage or roaming area, the “
No
Service
” message appears in the center of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Setting Up Your Phone (Basic)
This process details use of
the
Getting Started
feature
on your phone. You can use
Getting Started
to
personalize your phone’s
appearance and ringtone,
and to setup some
functions of your Samsung
Code for immediate use.
ᮣ
With the Home screen showing, press the
Start
soft key, then
select
Getting Started
( ). The following sub-sections
Press
& Hold