Filter
Top Products
Connecting to other devices 131
This is the Internet version of the user’s guide. © Print only for private use.
Pairing
To let your P900 initiate pairing with another device, such as a
headset
1. In
Control panel > Connections> Bluetooth > Settings
, set
Operation
mode
to
On.
2. Set the other device to be on or discoverable.
3. In the
Devices
tab, tap
Add
. Your P900 searches for all devices
in the vicinity and lists them.
– All enabled devices that are visible to others within range,
are shown with their name and icon. You can use
Show:
to
restrict the list to one category (only PC, for example).
– Paired devices that are within range are shown with
regular text.
– Non-paired devices that are within range are shown with
their names in italics.
– Devices that are within range but unknown are shown
with a preset name.
4. Select the device you want your P900 to pair with, and enter
a passcode when asked for it. When the passcode is accepted,
the pairing process is complete, see ‘Passcodes’ on page 132.
5. If in the future you want to allow a paired device to connect
to your P900 without you explicitly approving each
connection, you should select
Control panel > Connections >
Bluetooth > Devices,
then select a device and the check box
Allow to connect without confirmation
.
To let another device initiate pairing with your P900
1. In
Control panel > Connections > Bluetooth > Settings
, set
Operation mode
to
On
.
2. Follow the other device’s manual to initiate pairing.
3. When asked for a passcode, enter the same on both devices.
4. If in the future you want to allow a paired device to connect
to your P900 without you explicitly approving each
connection you should select
Control panel > Connections >
Bluetooth > Devices,
select a device and the check box
Allow to
connect without confirmation
.
Tip You can change the name of a paired device. When you pair
with other Bluetooth wireless technology enabled phones, it is
very useful to include the user's name as part of the device
name. This will make it very easy to beam information to the
desired recipients.
To let a headphone initiate pairing with your P900
1. Check that the device you want to pair with your P900:
– Is on and within range.
– Has its Bluetooth function activated and that it is in
visible mode.
2. In
Control panel > Connections > Bluetooth > Settings
, set
Operation mode
to
On
.
3. Follow the headphone’s manual to initiate pairing on the
headphone.