Filter
Top Products
Control panel 157
This is the Internet version of the user’s guide. © Print only for private use.
Area tab
On the Area tab you make settings related to Cell Broadcast
Services. These include both Area Information and Cell
Information services. The availability of Cell and Area
Information Services is operator-dependent.
Your network may broadcast the area code as cell information.
Your P900 can to display it below the network name in the Flip
closed standby view.
Area Information is a type of text message that is sent to all
subscribers in a certain network area, for example a local traffic
report.
To enable Cell Information
Select the
Cell information
check box
To turn Area Information on
1. Check the
Area information
check box. Received messages
will be automatically stored, and displayed in the list when
dismissed.
2. The list shows all the channels that you have defined on your
P900. The check box for each channel shows if it is on
(checked, ready to receive messages) or off (cleared, not
active):
To add a new channel
1. Select
New
.
2. Enter the number of the new channel in the New Channel
dialogue. Channel numbers can be from 0 to 999. If there are
too many channels defined,
New
will be disabled and you will
see a message:
Maximum channels on SIM
.
Channel numbering is operator-dependent. Please consult
your network operator for information.
To turn a channel on or off
Select the channel in the list and check the check box. To turn it
off, clear the check box.
Receive
These settings apply to multimedia messages that you
receive.
Select the
Play full screen
checkbox, when you want to
play MMS messages in full screen.
Select the check boxes to send a notification message to the
sender when a message is:
• Delivered to you:
Allow delivery notification
• Read by you:
Allow read notification
You can filter reception of incoming messages by message
class (
Advertisements
,
Information, and Anonymous
senders
) as well messages from senders listed in Contacts.
Selecting a check box will filter out messages of that
category.
To receive multimedia messages only from senders listed
in your Contacts, select all other check boxes and clear the
check box for
Anonymous senders.
MMS Advanced settings tabs