Filter
Top Products
P990i Setting up Internet, email and MMS 103
This is the Internet version of the user guide. © Print only for private use.
wizards that can configure accounts with many of the
major service providers.
You will find the auto setup messages in
Messaging >
Messages > Inbox
. To start an auto setup, select the
message and follow the instructions on the screen.
Setting up Internet
manually
To enter the details manually, or to edit an existing
account, select
Tools > Control panel > Connections >
Internet accounts
.
Create the Internet account as described in the following
sections. When you are ready you will be asked to save
the account in a group account. Tap
Yes, select a group
account and then tap
Save.
New Data account
To create a data account, select Internet accounts menu
> New account > Data
and make the data account
settings.
Data account
Account name – give the account a name for your
own reference, for example the name of your ISP.
Address – enter the Internet address of your ISP’s
access point.
Username – if required by your ISP, mark the
Username and password required check box and
enter the user name that you have received from
your ISP.
Password – enter your password.
To make further settings, select the account and follow
the instructions below.
Select
Data account menu > TCPIP > IP config.
IP config
Select IP version – Automatically, IPv4, IPv6, IPv4
compatible or IPv4 mapped.
IP address – an IPv4 address consists of four 3-digit
boxes and valid input is between 000 and 256 in
each box.
An IPv6 address consists of eight 4-digit boxes in
hexadecimal format between 0 and ffff. In
hexadecimal numbers you may use the numbers 0-
9and the letters a, b, c, d, e, f.
Select
Data account menu > TCPIP > IP DNS address
IP DNS address
Select IP version – Automatically, IPv4, IPv6, IPv4
compatible or IPv4 mapped.
Primary DNS address, Secondary DNS address –
the Domain Name Server (DNS) address is used to