Filter
Top Products
9
Getting to Know Your Phone
Battery Capacity
Your dual-band Sprint PCS Touchpoint Phone™ is equipped with a
Lithium Ion (LiIon) battery. It allows you to recharge your battery
before it is fully drained. The battery provides approximately
3.25 hours of continuous digital talk time (60 minutes in
analog) or approximately 130 hours of continuous digital
standby time (15 hours in analog).
Note: Long backlight settings affect the battery’s talk and standby times.
When the battery reaches 5% of its capacity, the battery icon
blinks. When there is about one minute of talk time left, the
phone sounds an audible alert every 30 seconds and then powers
down.
If the battery’s charge is completely run down, it takes 2 to 3
hours to fully recharge. It is not necessary to let the battery
completely run down before recharging.
To charge your batteries, use only Sprint PCS-approved charging
accessories.
Using the AC Adapter
To charge the battery, plug the AC Adapter into a standard wall
outlet and connect it to the phone via the I/O Connector on the
bottom of the phone. Alternatively, you can place the phone in
the charging cradle provided with your phone and connect the
AC Adapter to the back of the cradle.
The Battery Charge Status icon flashes during charging. When
the battery is fully charged, the battery icon stops flashing.