Toshiba STRATA DK8 Cell Phone User Manual


 
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM 60
SMDR OUTPUT/ACCOUNT CODE DIGIT LENGTH
SELECT = 2 - 6 (Item)
-7
Make a selection to indicate
For “2” SMDR Threshold Time = 0 or 1
which item is being assigned.
For “3” SMDR COR = 0 or 1 (Data)
Select 2 for SMDR Threshold
For “4” ACCOUNT = 04 - 15
Time.
For “5” TOLL DIAL, 0 - 5
Select 3 for SMDR output, etc.
For “6” DATA = DISA security code; 1 - 15 digits
For “7” CREDIT = Credit Card Digits; 1 - 30 digits
l-
Item Description
Data
2
SMDR Threshold Time 12
0 = 1 .O seconds 1 = 10 seconds
TIME
q
3
SMDR Output when a call is completed.
0 = Outgoing Only 1 = Incoming and Outgoing
(SMDR COR)
0
lo Forced/Voluntary Account Code Digit
(ACCOUNT)
4
Length 04 - 15.
(Digits are verified per Prog. 30, LED 14, and
Prog. 69. See Note 4)
5
6
Printout options
Toll Dial =I 0 1 All Calls7
I
= 0
1
= 0 2
= 0 3
= 0 4
= 0 5
Dial “0” calls only
Dial “1” calls only
Dial “00” calls only
Dial “l”, “O”, calls only
Dial “1” or “00” calls only
DISA Security Code9 (may be changed
from station, per Program 30)
(TOLL DIAL DATA)
q
I
DATA
O--I
I I
Credit card call digit length, 01 - 30 digits,
CREDI’
7
(see Program 43)
NOTES:
1. For more 1 information, see the k-rstructions preceding the record sheets.
2. For Selection 3, initialized data assigns SMDR output to be enabled for incoming calls that are answered.
3. For selection 4, initialized data assigns a 6-digit length to all Forced/Voluntary Account Codes.
4. If PBX code is dialed, numbers dialed after the code will be checked.
5. If AK, O/C or SPCC code begins with “O”, “I “, or “OO”, that call will print out.
6. When accessing LCR feature, all digits sent to CO will be output.
7. Programming 60-3-O (printout outgoing calls only) is still available.
8. Button/LED 1 = blank, Button/LED 2 = don’t care.
9. If a security code is not programmed, outgoing CO line access via DISA will not require a security code when dialing.
10. See Program 69 for Verified Account Codes.
Il. Number of digits required when “0” is the first digit dialed; if this number of digits is not dialed, the system will disconnect
the call after 20 seconds. “0” is counted as a digit. Example: 0 + 1 + 714 + 583 - 3700 = 12 digits; 12 should be
programmed as a minimum in this case.
12. Default is IO seconds.
2-85