Filter
Top Products
Automatic Callback (ACB):
[]
[rcl]
-1
Automatic Line Selection:
1. intercom Line
r-----q
2. CO Line
[,,,,,
3. Dial Access Code
[,,,,,::,,“:I
Alphanumeric Messages:
I::::,::]
Busy Field:
Your station will display the called number, followed by “LINE X ACB”, 30
d later.
Call Forward:
[[:1IIlORWlRDTO]
When you set automatic callback at a busy station, its number is
displayed.
When you receive an automatic callback, the station number you called
is displayed.
When you receive an automatic callback for a Central Office (CO) line,
the seized line’s number is displayed.
If your station automatically accesses an intercom line when you go off-
hook, INT is displayed.
II your station automatically accesses a Central Office (CO) line when
you go off-hook, the number of the seized CO line is displayed.
When you access a Central Office (CO) line by dialing a CO line group
access code,
the
accessed CO line number is displayed.
Messages of up to 32 characters may be used in alphanumeric
messaging. Messages may either be programmed or set as one-time
messages. (Messages may also be used with a timed reminder.)
The Busy Field display indicates the last two digits of the station numbers
that are busy or set for Do Not Disturb (DND). This sample display
indicates that stations 10, 15, and 27 are either in use or in DND mode. If
your system follows the default P-digit station intercom number plan, the
Busy Lamp Field (BLF) display indicates the station number. When
turned on, the BLF display has first priority; it will block out all other LCD
displays. In the case of station relocation, the BLF will display the number
assigned to the station’s logical port.
I
(II
Call Pickup:
[ YY c::; ::I
I
When you initiate any type of call forward, the LCD displays “CALL
FORWARD TO”.
After you set call forward, the station number to which your calls will be
forwarded is displayed, along with one of the following abbreviations:
“CF-AC
(Call Forward-All Calls)
“CF-BUSY”
(Call Forward-Busy)
“CF-NA”
(Call Forward-No Answer)
“CF-BINA”
(Call Forward-Busy/No Answer)
“CF-FIXED TO STNN” (Call Forward-Fixed)
When your call is forwarded to another station, the station you called is
shown first. It then changes to the station to which your call was
forwarded (22).
When a call is forwarded to your station, the calling station number (YY)
is displayed on the left and the station called (22) is displayed on the
right.
When you pick up an intercom call, the calling station’s number (YY) is
displayed on the left and the station number called (ZZ) is displayed on
the right.
Your LCD telephone displays information noting that your call to station
YY was picked up by station 22.
Calling Number-Intercom:
[111]
CO Line Identification:
When you receive an intercom call, the calling station’s number is
displayed. If user name is set on the calling station, the user’s name will
display instead of “NN CALLING”.
IOSHIBA IELECOM
[Wlrt]
The Central Office (CO) lines can be programmed to display an
identifying name of up to 16 characters. The name will be displayed on
outgoing and incoming calls.
l-4
1-5