Toshiba STRATA DK8 Cell Phone User Manual


 
8. The LCD will appear as follows after you press the JOIN Soft Key in
Step 7 and all parties will be conferenced.
[:::;“:::,I
W “LN 3 + ST12” indicates that you are in a Conference with CO line 3
and Station 12.
n You can exit the Conference and the other parties will remain
connected if you press the EXIT Soft Key.
W You can add another station or CO line by pressing the CONF Soft
Key.
NOTE:
If the Soff Key feature is activated at your station, incoming call
information will not display on your LCD while your station is busy To
display this information, you must either disconnect the existing calf or
place if on ho/d.
SOFT KEY PROMPT DEFINITIONS
The following list provides definitions of all of the Soft Key prompts that
could appear on your LCD.
TRNS-Press this Soft Key to initiate or complete a Transfer while on an
outside call. TRNS can cause an immediate or announced transfer,
depending on how the feature is set in system programming.
CONF-Press this Soft Key to initiate or complete a Conference.
PGE-Press this Soft Kay to park an outside call and to gain access to a
menu of Page options.
RING-Press this Soft Key to make a called station ring when making a
voice announce call to the station.
TALK-Press this Soft Key to make a voice announcement to a called
station that is ringing.
MESG-Press this Soft Key to set a message waiting indication at a
busy or unanswered station.
OVRD-Press this Soft Key to gain access to override options or to
override a station that is busy or in the Do Not Disturb mode.
BUSY-(Busy Override) Press this Soft Key to send a call-waiting tone to
a busy station. If the called busy station is equipped with Off-hook Call
Announce (OCA), that station will receive OCA warning tone and your
announcement.
EXEC-(Executive Override) Press this Soft Key to break into the
conversation of a busy called station,
ACB-Press this Soft Key to activate Automatic Callback after reaching a
busy or DND station, CO line, or CO Line group.
ABR-Press this Soft Key to activate Automatic Busy Redial after dialing
a busy outside telephone number.
RLS-Press this Soft Key to disconnect a call and to return to the idle
state.
RTRN-Press this Soft Key to terminate a feature operation and to return
to a previously displayed state.
LINE-Press this Soft Kay to add a CO line to an existing call while in the
Conference mode. The LCD will prompt you to access a CO line after
you press this key.
STA.-Press this Soft Key to add a station to an existing call while in the
Conference mode. The LCD will prompt you to dial a station number after
you press this key.
JOIN-Press this Soft Key while on a conference call to join all parties to
a Conference.
EXIT-Press this Soft Key to exit from a Conference and to leave the
remaining parties connected.
3-4
3-5