Filter
Top Products
Key displays will be shown since Mode, Page, and Scroll no longer
app/y while Soft Keys are active.
n If you initiated the call, the ‘TRNS” prompt will appear 30 seconds
after the first digit of the telephone number is dialed-the “ABR”
prompt for Automatic Busy Redial (ABR) will appear during this first
30 seconds (if it does not appear, then ABR was not assigned to your
station in system programming). If the call is an incoming call, the
“TRNS” prompt will appear immediately when you answer the call.
2. Press the CONF Soft Key to initiate the Conference.
TALK ON LINE 3
TRNS CONF PGE
n The outside call will be placed on hold and the LCD will appear as
follows in step 3 after you press the CONF Soft Key in Step 2.
3. To conference with a station, press the STA. Soft Key.
LINE OR STATION?
LINE STA.
RTRN
n Whenever the RTRN Soft Key appears, you can terminate the
operation and return to the outside call by pressing the RTRN Soft
Key.
4. Dial a station number when the following LCD appears:
5. After you dial the station number (12 in this example), you will see
one of the displays below for about three seconds. The display will
then change to the display in Step 6.
[NG]or[!i-Kz--]
Called station (12) has “user Called station (12) has “user
name” turned off. name” turned on.
6. After three seconds the user’s name (or number) is replaced with the
following display and you can voice announce to station 12.
[ANNOUNCE TO ~~121
TRNS RING RTRN
(voice first signaling)
n You could stop the called station voice announce and make station
12 ring by pressing the RING Soft Key.
n Instead of proceeding with the Conference, you could transfer the
call by pressing the TRNS Soft Key.
n You could terminate the operation and return to the outside call by
pressing the RTRN Soft Key.
7. The LCD will appear as follows after the called station answers. Your
station is connected to Station 12 and the outside call remains on
hold. Press the JOIN Soft Key to join all parties in a Conference.
TALK WITH ST12
TRNS JOIN RTRN
n Instead of proceeding with the Conference, you could transfer the
call by pressing the TRNS Soft Key.
n You could terminate the operation and return to the outside call by
pressing the RTRN Soft Key.
3-2
3-3